SRP-350IIOBE
Rev. 1.00 BIXOLON
Generate pulse at real-time
■ Output the pulse specified by t to connector pin m as following:
Drawer kick-out connector pin 2
Drawer kick-out connector pin 5
■ This command generates the drive pulse to connector pin m with pulse width defined by t as following:
• Drawer kick-out connector pin 2 is selected with m=0 while pin 5 chosen for m=1.
• Pulse ON time is [t x100 ms] and OFF time [t x100 ms].
■ Upon receiving this command, the printer outputs the drive pulse to the specified connector pin.
■ The real time command is stored into the receive buffer and executed with higher priority than other commands.
Comments to this Manuals