BIXOLON SRP-350IIOBE Specifications download pdf (Page 115)

SRP-350IIOBE

Rev. 1.00 BIXOLON

- 115 -

GS a

Function:

Enable/Disable Automatic Status Back (ASB)

Code:

ASCII

Hex

Decimal

Range:

0 ≤ n ≤ 255

Default:

n = 0

Description:

■ This enables or disables ASB (Automatic Status Back) according to n.

• ASB is enabled when n > 0.

Remarks:

■ ASB is the function that transmit the printer status such as cover open/close and Online/Offline] continuously at the

time interval specified regardless of the status change if ASB is enabled. Using this ASB function, the host can check

to see if the printer is running properly.

■ Once ASB has been enabled, the printer continues to transmit the current printer status at the specified interval until

ASB is disabled.

■ When n = 0, ASB is disabled. The printer stops transmitting the status.

■ With parallel and USB interface, the printer status is transmitted whenever the host computer changes to the reverse

mode regardless of the printer status change. It is recommended that the periodic time interval at which the host

changes to reverse mode is more than 500ms in order to receive the correct status.

■ With serial interface, ASB status is transmitted continuously at the interval of 1 sec even if the status is not changed.

■ The setting of this command remains effective until ESC @, printer reset or power cycling is executed.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 132 133

No comments

BIXOLON SRP-350IIOBE Specifications Page 115