BIXOLON SRP-275II User Manual download pdf (Page 16)

Rev. 1.01

- 16 -

SRP-275II

3-1-2 DIP Switch setting for Star(SP500) mode

• DIP Switch 1

Switch Function ON OFF Default

1-1

1-2

Emulation Selection (*1) Refer to the following table OFF

1-3 Auto cutter Enable Disable OFF

1-4 Black/Red Printing Enable Disable OFF

1-5

1-6

1-7

1-8

Reserved OFF

• DIP Switch 2 (RS232C serial interface model)

Switch Function ON OFF Default

2-1

2-2

Reserved OFF

2-3 Hand shaking XON/XOFF DTR/DSR OFF

2-4 Word length 7 bits 8 bits OFF

2-5 Parity check Enable Disable OFF

2-6 Parity selection EVEN ODD OFF

2-7 OFF

2-8

Baud rate selection (*2) Refer to the following table

OFF

NOTES

(*1) Emulation Selection (DSW 1-1 and 1-2)

Emulation 1-1 1-2

BXL/POS OFF OFF

BXL/POS-KP ON ON

STAR OFF ON

CITIZEN ON OFF

- BXL/POS-KP(Kitchen Printer mode) : A alarm is generated by printer after auto cutting and in paper end error.

(*2) Baud rate selection (Transmission speed)

Transmission 2-7 2-8

2400 baud ON ON

4800 baud OFF ON

9600 baud OFF OFF

19200 baud ON OFF

NOTICE

Change in DIP Switch settings are recognized only when the printer power is turned on or when the

printer is reset by using the interface. If the DIP Switch setting is changed after the printer power is

turned on, the change does not take effect until the printer is turned on again or is reset.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Comments to this Manuals

No comments

BIXOLON SRP-275II User Manual Page 16

Comments to this Manuals

Related products and manuals for Print & Scan BIXOLON SRP-275II