BIXOLON SPP-R200 User Manual

User's Manual SPP-R200 Mobile Printer Rev. 1.08 http://www.bixolon.com

Rev. 1.08 - 10 -SPP-R2001. Content Confirmation The following items should all be contained in the printer package. Contact the dealer from which the

Rev. 1.08 - 11 -SPP-R2002. Product Part Names • Front • Rear Cable ConnectionPower ConnectionBatteryBelt Strap HoleInterface Cap Paper CoverPower

Rev. 1.08 - 12 -SPP-R2003. Installation & Usage 3-1 Battery Installation 1) Insert the battery on the rear side of the printer, aligning the batt

Rev. 1.08 - 13 -SPP-R2003-2-2 Battery Holder (Optional) Usage 1) Connect the power cord to the battery ②charger .① 2) Connect the battery charger

Rev. 1.08 - 14 -SPP-R2003-2-4 Quad Charger (Optional) Usage 3-2-4-1 Connecting the cables 1) Connect the power cord to the adaptor, and Connect the

Rev. 1.08 - 15 -SPP-R2003-2-4-2 Battery Charging 1) Fasten batteries via the battery hooks into the Quad Charger as shown above. 2) Push the batter

Rev. 1.08 - 16 -SPP-R2003-3 Paper Installation 1) Press the Open button to open the paper cover. 2) Insert the paper as shown in the image. (

Rev. 1.08 - 17 -SPP-R2003-4 Belt Strap Usage 1) Insert the belt strap screw into the belt strap hole. 2) Use a coin to tighten the belt stra

Rev. 1.08 - 18 -SPP-R2003-5 Leather Case (Optional) Usage 1) Undo the Velcro. 2) Place the printer into the leather case following the direct

Rev. 1.08 - 19 -SPP-R2003-6 Control Panel Usage • Power Button This button is used to turn the printer on and off. When the printer is

Rev. 1.08 - 2 - SPP-R200 Table of Contents ※ Manual Information & Usage Precautions····························································

Rev. 1.08 - 20 -SPP-R2003-7 MSR Usage 1) Press the MSR cover to open. 2) Insert the card as shown in the image and swipe in the direction of the a

Rev. 1.08 - 21 -SPP-R200• Self-Test Printout Sample Boot loader version : VER v2.01 20071005 Firmware version : V01.00 STOB 080901 Bluetooth F

Rev. 1.08 - 22 -SPP-R2005. Label Printing Function 5-1 Label Function Setting Label paper and black mark paper available at the label mode. • Settin

Rev. 1.08 - 23 -SPP-R2006. Peripherals Connection This product can communicate with other devices via Bluetooth communication and cable. 6-1 Bluetoo

Rev. 1.08 - 24 -SPP-R2007. Printer Cleaning If the interior of the printer is dusty, print quality can decline. In such a case, follow the instructio

Rev. 1.08 - 25 -SPP-R2008. Appendix 8-1 Specifications Item Description Printing Method Thermal printing Printing Speed 80 mm/sec Resolution 203 DP

Rev. 1.08 - 26 -SPP-R2008-2 Certification 1) EMC & Safety Standards • Europe: CE Mark: CE 0984, DEMKO GS: EN60950-1: 2001 • North America: FCC r

Rev. 1.08 - 3 - SPP-R200 Manual Information ※ Manual Information & Usage Precautions This user’s manual contains basic information for product u

Rev. 1.08 - 4 - SPP-R200 Safety Precautions In using the present appliance, please keep the following safety regulations in order to prevent any ha

Rev. 1.08 - 5 - SPP-R200 CAUTION Violating following instructions can cause slight wound or damage the appliance. Do not use the printer wh

Rev. 1.08 - 6 - SPP-R200 Battery Safety Precautions Make sure to review the user manual carefully prior to product use. Neglecting to heed the fol

Rev. 1.08 - 7 - SPP-R20010. Do not pierce the battery with a sharp object, such as a nail, or hit it with a heavy object, such as a hammer, and take

Rev. 1.08 - 8 - SPP-R200 Caution 1. Do not use or leave the battery in a location exposed to high temperatures or intense direct sunlight, such as

Rev. 1.08 - 9 - SPP-R200 Recommended 1. Review the user manual for instructions concerning insertion/removal of batteries into/from the product. 2