BIXOLON SRP-770II User Manual

User's Manual SRP-770II/770IIE Label Printer Rev. 1.15 http://www.bixolon.com

Rev. 1.15 - 10 -SRP-770II/770IIE 3. Installation & Usage 3-1 Power Connection Connect power to the printer as shown below. 1) Turn off

Rev. 1.15 - 11 -SRP-770II/770IIE3-2 Interface Cable Connection Connect the interface cable as shown below. This printer supports the following comm

Rev. 1.15 - 12 -SRP-770II/770IIE3-3 Paper Installation 1) Open the Paper Cover. 2) Spread the paper holder and insert paper as shown. SAMSUNGLABEL

Rev. 1.15 - 13 -SRP-770II/770IIE3-4 LED Display Feed button Paper feed or cancel the print job. LED The current printer status can b

Rev. 1.15 - 14 -SRP-770II/770IIE3-5 Test printing 3-5-1 Printing using Windows driver 1) Install the Windows driver. Refer to the “Windows driver m

Rev. 1.15 - 15 -SRP-770II/770IIE4. Self-Test The self-test checks whether the printer has any problems. (Users cannot perform this procedure if usi

Rev. 1.15 - 16 -SRP-770II/770IIE5. Detailed features 5-1 Printer Settings with Dip switches The dip switches are located on the bottom of the prin

Rev. 1.15 - 17 -SRP-770II/770IIE[Table 1] Dip Switch 1 No Functions Details Off 4.0 ips 1-1 Speed Selection On 5.0 ips 4 3 2 Density Off Off Of

Rev. 1.15 - 18 -SRP-770II/770IIE5-3 Gap Sensor Auto-Calibration Gap sensor auto-calibration is used when the printer does not detect a gap on the la

Rev. 1.15 - 19 -SRP-770II/770IIE5-4 Gap Sensor Manual-Calibration Manual-calibration of media detection can be used when the printer cannot detect a

Rev. 1.15 - 2 - SRP-770II/770IIE Table of Contents ※ Manual Information & Usage Precautions····················································

Rev. 1.15 - 20 -SRP-770II/770IIE5-5 The Peel-Off This function is used to automatically separate labels from the liner. - The peeler is for Label P

Rev. 1.15 - 21 -SRP-770II/770IIE3) Adjust the paper guides and close the cover. 4) Turn the printer off and back on. ( O ) ( X )

Rev. 1.15 - 22 -SRP-770II/770IIE5-6 Using Fan-Fold Paper Insert paper through both the rear slot and guides. Adjust holders and guides to the width

Rev. 1.15 - 23 -SRP-770II/770IIE5-7 Auto Cutter (option) Auto cutter should be used for continuous paper only. ( i.e. roll paper) 1. Open the Dip s

Rev. 1.15 - 24 -SRP-770II/770IIE6. Cleaning Head Paper dust on the heating elements may lower the printer quality. When dirty, clean the print head

Rev. 1.15 - 25 -SRP-770II/770IIE7. Appendix 7-1 Specifications Item Description Printing Method Thermal Transfer / Direct Thermal Printing Dot D

Rev. 1.15 - 26 -SRP-770II/770IIE7-2 Certification 1) EMC & Safety Standards • Europe: CE EMC,CB-Scheme:IEC60950-1, GS: EN60950-1: 2001 • North

Rev. 1.15 - 3 - SRP-770II/770IIE Manual Information ※ Manual Information & Usage Precautions This user manual contains basic information for pro

Rev. 1.15 - 4 - SRP-770II/770IIE Safety Precautions In using the present appliance, please keep the following safety regulations in order to preven

Rev. 1.15 - 5 - SRP-770II/770IIE CAUTION Violating following instructions can cause slight wound or damage the appliance. Do not use

Rev. 1.15 - 6 - SRP-770II/770IIE Other Precautions The copyright for this user manual and various other manuals is property of the BIXOLON Co., Ltd

Rev. 1.15 - 7 - SRP-770II/770IIE1. Content Confirmation The following items should all be contained in the printer package. Contact the dealer from

Rev. 1.15 - 8 - SRP-770II/770IIE2. Product Part Names Feed ButtonCover Peel-offCover Lever Printer HeadPaper Holder Paper Guide Peel-off

Rev. 1.15 - 9 - SRP-770II/770IIE SAMSUNGLABEL PRNTER Dip Switch Auto Cutter(Option)IEEE1284 Receptacle USB