BIXOLON SLP-T400 User Manual

User's Manual SLP-T400 / T403 Label Printer Rev. 1.04 http://www.bixolon.com

Rev. 1.04 - 10 -SLP-T400 / T4033. Installation & Usage 3-1 Power Connection Connect power to the printer as shown below. 1) Turn off

Rev. 1.04 - 11 -SLP-T400 / T4033-2 Interface Cable Connection Connect the interface cable as shown below. This printer supports the following commu

Rev. 1.04 - 12 -SLP-T400 / T4033-3 Paper Installation 1) Open the Paper Cover. 2) Spread the paper holder and insert paper as shown. 3) Open th

Rev. 1.04 - 13 -SLP-T400 / T4033-4 Ribbon Installation 3-4-1 Type of Ribbon 1) Type by Film Coating Location - Take note before ribbon purchase tha

Rev. 1.04 - 14 -SLP-T400 / T4033-4-2 Inserting a One-Inch Core Ribbon 1) Insert the Holder ribbon into the core and ribbon. (keep note of ribbon pri

Rev. 1.04 - 15 -SLP-T400 / T4033-4-4 Knob Adjustment by Ribbon Length Ribbon lengths of 74m, 100m (0.5” core), and 300m (1” core) can all be used wi

Rev. 1.04 - 16 -SLP-T400 / T4033-4-5 Narrow Ribbon Installation When using ribbons of widths of 110mm or lower, install in a centered position on th

Rev. 1.04 - 17 -SLP-T400 / T4033-5 LED Display Pause Status Error Feed/Cancel : During print jobs, this button can be used to temporarily cea

Rev. 1.04 - 18 -SLP-T400 / T4034. Self-Test The self-test checks whether the printer has any problems. (Users cannot perform this procedure if usin

Rev. 1.04 - 19 -SLP-T400 / T4035. Fine Tuning 5-1 Printer Settings with Dip switches The following functions can be selected using the dip switc

Rev. 1.04 - 2 - SLP-T400 / T403 Table of Contents ※ Manual Information & Usage Precautions...

Rev. 1.04 - 20 -SLP-T400 / T403[Table 1] Dip Switch 1 No Functions Details Off 5.0 ips 1-1 Speed Selection On 6.0 ips 4 3 2 Density Off Off Off

Rev. 1.04 - 21 -SLP-T400 / T4035-2 Printer Settings with Utility Program The printer settings utility program offered by the manufacturer can be u

Rev. 1.04 - 22 -SLP-T400 / T4035-3 Pause/Cancel During multiple-page print jobs, the Pause and Cancel button can be used to temporarily cease printi

Rev. 1.04 - 23 -SLP-T400 / T4035-4 Gap Sensor Auto-Calibration Gap sensor auto-calibration is used when the printer does not detect a gap on the lab

Rev. 1.04 - 24 -SLP-T400 / T4035-5 Gap Sensor Manual-Calibration Manual-calibration of media detection can be used when the printer cannot detect a

Rev. 1.04 - 25 -SLP-T400 / T403 5-6 The Peel-Off As a function that is used to peel-off labels, it is used only with label paper. (After adjusting

Rev. 1.04 - 26 -SLP-T400 / T4035) Adjust the paper guides and close the label peel-off cover. 6) Close the ribbon roll and paper covers. 7) Turn

Rev. 1.04 - 27 -SLP-T400 / T4035-7 Using Fan-Fold Paper Supplying paper to the printer externally is done as follows. 5-7-1 Printer Preparation Rem

Rev. 1.04 - 28 -SLP-T400 / T4035-8 Auto Cutter (Option) The Auto Cutter can be used for automatic cutting. 1) Open the dip switch cover, and turn s

Rev. 1.04 - 29 -SLP-T400 / T4036. Cleaning Head Paper dust on the heating elements may lower the printer quality. When dirty, clean the print head

Rev. 1.04 - 3 - SLP-T400 / T403 Manual Information ※ Manual Information & Usage Precautions This user manual contains basic information for pro

Rev. 1.04 - 30 -SLP-T400 / T4037. Appendix 7-1 Specifications Item Description Printing Method Thermal Transfer / Direct Thermal Printing Dot Den

Rev. 1.04 - 31 -SLP-T400 / T4037-2 Certification 1) EMC & Safety Standards • Europe: CE EMC,CB-Scheme:IEC60950-1, GS: EN60950-1: 2001 • North

Rev. 1.04 - 4 - SLP-T400 / T403 Safety Precautions In using the present appliance, please keep the following safety regulations in order to prevent

Rev. 1.04 - 5 - SLP-T400 / T403 CAUTION Violating following instructions can cause slight wound or damage the appliance. Do not u

Rev. 1.04 - 6 - SLP-T400 / T403 Other Precautions The copyright for this user manual and various other manuals is property of the BIXOLON Co., Ltd.

Rev. 1.04 - 7 - SLP-T400 / T4031. Content Confirmation The following items should all be contained in the printer package. Contact the dealer from

Rev. 1.04 - 8 - SLP-T400 / T4032. Product Part Names Feed Button Cover Peel-offCover Lever Printer Head Paper Holder Paper Guide (Gap S

Rev. 1.04 - 9 - SLP-T400 / T403 Power Switch Dip Switch Auto Cutter (Option) IEEE1284 Receptacle USB Recept