BIXOLON SPP-R200 User Manual download pdf (Page 24)

Rev. 1.08

- 24 -

SPP-R200

7. Printer Cleaning

If the interior of the printer is dusty, print quality can decline.

In such a case, follow the instructions below to clean the printer.

CAUTION

• Make sure to turn the printer power off prior to cleaning.

• As the print head gets very hot during printing, if intending to clean the print head, turn

the printer power off and wait approximately 10 minute before commencement.

• When cleaning the print head, take care not to touch the heated portion of the print

head.

→ The print head is susceptible to damage from static electricity, etc.

• Take care not to allow the print head to become scratched and/or damaged in any way.

1) Open the paper cover and remove any paper that may be present.

2) Wipe the print head with a cleaning pen.

3) Use a cloth moistened with an alcohol solution to clean the paper sensor are and

remove any paper remnants and/or dust.

4) Insert paper into the printer 1~2 minutes after completing the cleaning process and

close the printer cover.

1 2 ... 19 20 21 22 23 24 25 26

No comments

BIXOLON SPP-R200 User Manual Page 24