BIXOLON SPP-R300 User Manual download pdf (Page 26)

Rev. 1.03

- 26 -

SPP-R300

7. Printer Cleaning

If the interior of the printer is dusty, print quality can decline.

In such a case, follow the instructions below to clean the printer.

CAUTION

• Make sure to turn the printer power off prior to cleaning.

• As the print head gets very hot during printing, if intending to clean the print head, turn

the printer power off and wait approximately 10 minute before commencement.

• When cleaning the print head, take care not to touch the heated portion of the print head.

→ The print head is susceptible to damage from static electricity, etc.

• Take care not to allow the print head to become scratched and/or damaged in any way.

1) Open the paper cover and remove any paper that may be present.

2) Clean the head part of the printer using the cleaning pen.

3) Use a cloth moistened with an alcohol solution to clean the paper sensor are and

remove any paper remnants and/or dust.

4) Insert paper into the printer 1~2 minutes after completing the cleaning process and

close the printer cover.

1 2 ... 21 22 23 24 25 26 27 28 29

No comments

BIXOLON SPP-R300 User Manual Page 26