BIXOLON SPP-R300 User Manual

User's Manual SPP-R300 Mobile Printer Rev. 1.03 http://www.bixolon.com

Rev. 1.03 - 10 - SPP-R300 1. Content Confirmation The following items should all be contained in the printer package. Contact the dealer from whi

Rev. 1.03 - 11 - SPP-R300 2. Product Part Names • Front • Rear Cable ConnectionPower ConnectionBatteryBelt Strap HoleInterface CapShoulder Strap

Rev. 1.03 - 12 - SPP-R300 3. Installation & Usage 3-1 Battery Installation 1) Insert the battery on the rear side of the printer, align

Rev. 1.03 - 13 - SPP-R300 3-2-2 Using Single Battery Cradle (Optional) 1) Connect the power cord② to the battery charger ①. 2) Connect the batte

Rev. 1.03 - 14 - SPP-R300 3-2-4 Using Quad Battery Charger (Optional) 3-2-4-1 Connecting the cables 1) Connect the power cord to the adaptor, and

Rev. 1.03 - 15 - SPP-R300 3-2-4-2 Battery Charging 1) Insert the battery into the quad battery charger as shown in the figure on the left. 2) Gentl

Rev. 1.03 - 16 - SPP-R300 3-3 Paper Installation 1) Press the Open button to open the paper cover. 2) Insert the paper as shown in the image

Rev. 1.03 - 17 - SPP-R300 3-4 Using Belt Strap 1) Insert the belt strap screw into the belt strap hole. 2) Use a coin to tighten the belt st

Rev. 1.03 - 18 - SPP-R300 3-5 Using Case / Protective Case (Optional) 1) Open its top cover. 2) Insert your printer into the protective case

Rev. 1.03 - 19 - SPP-R300 3-6 Using Shoulder Strap (Optional) 1) Connect the clips of the shoulder strap to the printer as shown in the figure on t

Rev. 1.03 - 2 - SPP-R300 Table of Contents ※ Manual Information & Usage Precautions ··························································

Rev. 1.03 - 20 - SPP-R300 3-7 Using Control Panel • Power Button This button is used to turn the printer on/off. 1) To turn the printer

Rev. 1.03 - 21 - SPP-R300 3-8 Using MSR 1) Press the MSR cover to open. 2) Insert the card as shown in the image and swipe in the direction of t

Rev. 1.03 - 22 - SPP-R300 • Self-Test Sample (For Bluetooth) Boot loader version : VER v2.02 20100817 Firmware version : V01.00 STOB 042211 BT e

Rev. 1.03 - 23 - SPP-R300 • Self-Test Sample (For Wireless LAN) Boot loader version : VER v2.02 20100817 Firmware version : V01.00 STOB 042211 N

Rev. 1.03 - 24 - SPP-R300 5. Label Printing Function 5-1 Label Function Setting Label paper and black mark paper available at the label mode. • Sett

Rev. 1.03 - 25 - SPP-R300 6. Peripherals Connection This product can communicate with peripherals by using Bluetooth, wireless LAN or exte

Rev. 1.03 - 26 - SPP-R300 7. Printer Cleaning If the interior of the printer is dusty, print quality can decline. In such a case, follow the instruct

Rev. 1.03 - 27 - SPP-R300 8. Appendix 8-1 Specifications Item Description Printing Printing Method Thermal printing Printing Speed 100 mm/sec Resolu

Rev. 1.03 - 28 - SPP-R300 8-2 Certification 1) WEEE (Waste Electrical and Electric Equipment) This mark shown on the product or its literatu

Rev. 1.03 - 29 - SPP-R300 Disposal Directions • Do not dispose of waste battery packs recklessly. • Do not burn or throw in fire to dispose of the ba

Rev. 1.03 - 3 - SPP-R300 Manual Information ※ Manual Information & Usage Precautions This user’s manual contains basic information for product

Rev. 1.03 - 4 - SPP-R300 Safety Precautions In using the present appliance, please keep the following safety regulations in order to prevent any h

Rev. 1.03 - 5 - SPP-R300 CAUTION Violating following instructions can cause slight wound or damage the appliance. Do not use the printe

Rev. 1.03 - 6 - SPP-R300 Battery Safety Precautions Make sure to review the user manual carefully prior to product use. Neglecting to heed the fo

Rev. 1.03 - 7 - SPP-R300 10. Do not pierce the battery with a pointed object, such as nail or awl, or strike with a heavy object, such as a hammer, a

Rev. 1.03 - 8 - SPP-R300 Caution 1. Do not use or leave the battery in a location exposed to high temperatures or intense direct sunlight, such as

Rev. 1.03 - 9 - SPP-R300 Recommended 1. Review the user manual for instructions concerning insertion/removal of batteries into/from the