Bixolon SRP-770II User Manual

User's Manual SRP-770II/770IIE Label Printer Rev. 1.19 http://www.bixolon.com

Rev. 1.19 - 10 - SRP-770II/770IIE 3. Installation & Usage 3-1 Power Connection Connect power to the printer as shown below. 1) Turn of

Rev. 1.19 - 11 - SRP-770II/770IIE 3-2 Interface Cable Connection Connect the interface cable as shown below. This printer supports the following co

Rev. 1.19 - 12 - SRP-770II/770IIE 3-3 Paper Installation 1) Open the Paper Cover. 2) Spread the paper holder and insert paper as shown. SAMSUNGLABE

Rev. 1.19 - 13 - SRP-770II/770IIE 3-4 LED Display Feed button Paper feed or cancel the print job. LED The current printer status can

Rev. 1.19 - 14 - SRP-770II/770IIE 3-5 Test printing 3-5-1 Printing using Windows driver 1) Install the Windows driver. Refer to the “Windows driver

Rev. 1.19 - 15 - SRP-770II/770IIE 4. Self-Test The self-test checks whether the printer has any problems. (Users cannot perform this procedure if u

Rev. 1.19 - 16 - SRP-770II/770IIE 5. Detailed features 5-1 Printer Settings with Dip switches The dip switches are located on the bottom of the pr

Rev. 1.19 - 17 - SRP-770II/770IIE [Table 1] Dip Switch 1 No Functions Details 1-1 Speed Selection Off 4.0 ips On 5.0 ips 1-2 1-3 1-4 Density Select

Rev. 1.19 - 18 - SRP-770II/770IIE 5-3 Gap Sensor Auto-Calibration Gap sensor auto-calibration is used when the printer does not detect a gap o

Rev. 1.19 - 19 - SRP-770II/770IIE 5-4 Gap Sensor Manual-Calibration Manual-calibration of media detection can be used when the printer cannot detect

Rev. 1.19 - 2 - SRP-770II/770IIE Table of Contents ※ Manual Information & Usage Precautions ·················································

Rev. 1.19 - 20 - SRP-770II/770IIE 5-5 The Peel-Off This function is used to automatically separate labels from the liner. - The peeler is for Label

Rev. 1.19 - 21 - SRP-770II/770IIE 3) Adjust the paper guides and close the cover. 4) Turn the printer off and back on. ( O ) ( X )

Rev. 1.19 - 22 - SRP-770II/770IIE 5-6 Using Fan-Fold Paper Insert paper through both the rear slot and guides. Adjust holders and guides to the widt

Rev. 1.19 - 23 - SRP-770II/770IIE 5-7 Auto Cutter (option) Auto cutter should be used for continuous paper only. ( i.e. roll paper) 1. Open the Dip

Rev. 1.19 - 24 - SRP-770II/770IIE 6. Cleaning Head Paper dust on the heating elements may lower the printer quality. When dirty, clean the print he

Rev. 1.19 - 25 - SRP-770II/770IIE 7. Appendix 7-1 Specifications Item Description Printer Printing Method Direct Thermal Printing Dot Density 203

Rev. 1.19 - 26 - SRP-770II/770IIE 7-2 Certification 1) EMC & Safety Standards • Europe: CE EMC,CB-Scheme:IEC60950-1, GS: EN60950-1: 2001 • N

Rev. 1.19 - 3 - SRP-770II/770IIE Manual Information ※ Manual Information & Usage Precautions This user manual contains basic information for pr

Rev. 1.19 - 4 - SRP-770II/770IIE Safety Precautions In using the present appliance, please keep the following safety regulations in order to preve

Rev. 1.19 - 5 - SRP-770II/770IIE CAUTION Violating following instructions can cause slight wound or damage the appliance. Do not use t

Rev. 1.19 - 6 - SRP-770II/770IIE Other Precautions The copyright for this user manual and various other manuals is property of the BIXOLON Co., Lt

Rev. 1.19 - 7 - SRP-770II/770IIE 1. Content Confirmation The following items should all be contained in the printer package. Contact the dealer

Rev. 1.19 - 8 - SRP-770II/770IIE 2. Product Part Names Feed Button Cover Peel-off Cover Lever Printer Head Paper Holder Paper Guide Peel

Rev. 1.19 - 9 - SRP-770II/770IIE SAMSUNGLABEL PRNTER Dip Switch Auto Cutter (Option) IEEE1284