BIXOLON SPP-R200II User Manual download pdf (Page 7)

Rev. 1.01

- 7 -

SPP-R200II

10. Do not pierce the battery with a pointed object, such as nail or awl, or strike with a

heavy object, such as a hammer, and take care not to step on the battery. There is a

potential risk of battery overheating, combustion, and/or explosion caused by an

internal short circuit.

11. Do not solder the battery directly. Doing so may melt the insulating materials and/or

damage the safety mechanism or safety equipment, resulting in battery overheating,

combustion, and/or explosion.

12. Do not disassemble and/or modify the battery. The battery contains safety equipment

and a safety mechanism to prevent danger. There is a potential risk of overheating,

combustion, and/or explosion caused by disassembly.

13. Do not charge the battery near open flames and/or under direct sunlight. Because

exposure to high temperatures triggers the operation of the safety mechanism, the

battery may not charge or may overcharge due to destruction of the safety mechanism.

There is a potential risk of overheating, combustion, and/or explosion.

14. Do not expose the battery to high temperatures over 60

C, and do not use or store it

in a hot or humid place.

15. Do not use the battery if it is damaged or the exterior is deformed due to external

shock or if it is swollen.

Warning

1. Do not place the battery within the reach of small children to prevent any swallowing

accidents. If a small child has swallowed the battery, consult a physician immediately.

2. Do not place the battery in a microwave oven and/or high voltage appliance. Doing so

can cause rapid overheating and/or destruction of the sealing, resulting in battery

overheating, combustion, and/or explosion.

3. Do not combine and use any battery of different capacity and/or type with the primary

battery. Doing so can cause excessive electrical discharge during use or excessive

charging during charging, resulting in an abnormal chemical reaction within the battery

that can cause battery overheating, combustion, and/or explosion.

4. If during battery usage, storage, or charging, a strange odor or conditions differing from

the normal, such as overheating, color changes, warping, etc., are detected, remove

the battery from the product or charger and discontinue use. Continued use may

cause battery overheating, combustion, and/or explosion.

5. When recharging, if the battery is not charged after the normal fixed charging time,

discontinue charging. Continued charging can result in battery overheating,

combustion, and/or explosion.

6. If the battery appears to be coated with condensation or emits a strange odor,

immediately place it far away from any heat source. The condensation may be

caused by a leak of electrolytic solution that can ignite to cause battery combustion

and/or explosion.

7. If the battery is leaking electrolytic solution and any of the solution enters the eyes,

immediately wash out with clean water, and then consult a physician to receive

treatment. Neglecting to do so can cause permanent eye injuries.

1 2 3 4 5 6 7 8 9 10 11 12 ... 30 31

Comments to this Manuals

No comments

BIXOLON SPP-R200II User Manual Page 7

Comments to this Manuals

Related products and manuals for Print & Scan BIXOLON SPP-R200II