Bixolon label printer SRP-770II User Manual

User's Manual SRP-770II Label Printer Rev. 1.14 http://www.bixolon.com

Rev. 1.14 - 10 -SRP-770II3. Installation & Usage 3-1 Power Connection Connect power to the printer as shown below. 1) Turn off the prin

Rev. 1.14 - 11 -SRP-770II3-2 Interface Cable Connection Connect the interface cable as shown below. This printer supports the following communicati

Rev. 1.14 - 12 -SRP-770II3-3 Paper Installation 1) Open the Paper Cover. 2) Spread the paper holder and insert paper as shown. SAMSUNGLABEL PRINT

Rev. 1.14 - 13 -SRP-770II3-4 LED Display Feed button Paper feed or cancel the print job. LED The current printer status can be viewe

Rev. 1.14 - 14 -SRP-770II4. Self-Test The self-test checks whether the printer has any problems. (Users cannot perform this procedure if using the

Rev. 1.14 - 15 -SRP-770II5. Fine Tuning 5-1 Printer Settings with Dip switches The dip switches are located on the bottom of the printer. The dip

Rev. 1.14 - 16 -SRP-770II[Table 1] Dip Switch 1 No Functions Details Off 4.0 ips 1-1 Speed Selection On 5.0 ips 4 3 2 Density Off Off Off 13 O

Rev. 1.14 - 17 -SRP-770II5-3 Gap Sensor Auto-Calibration Gap sensor auto-calibration is used when the printer does not detect a gap on the label pap

Rev. 1.14 - 18 -SRP-770II5-4 Gap Sensor Manual-Calibration Manual-calibration of media detection can be used when the printer cannot detect a media

Rev. 1.14 - 19 -SRP-770II5-5 The Peel-Off This function is used to automatically separate labels from the liner. - The peeler is for Label Paper on

Rev. 1.14 - 2 - SRP-770II Table of Contents Manual Information & Usage Precautions※ ··························································

Rev. 1.14 - 20 -SRP-770II3) Adjust the paper guides and close the cover. 4) Turn the printer off and back on.

Rev. 1.14 - 21 -SRP-770II5-6 Using Fan-Fold Paper Insert paper through both the rear slot and guides. Adjust holders and guides to the width of the

Rev. 1.14 - 22 -SRP-770II5-7 Auto Cutter (option) Auto cutter should be used for continuous paper only. ( i.e. roll paper) 1. Open the Dip switch c

Rev. 1.14 - 23 -SRP-770II6. Cleaning Head Paper dust on the heating elements may lower the printer quality. When dirty, clean the print head as fol

Rev. 1.14 - 24 -SRP-770II7. Appendix 7-1 Specifications Item Description Printing Method Thermal Transfer / Direct Thermal Printing Dot Density

Rev. 1.14 - 25 -SRP-770II7-2 Certification 1) EMC & Safety Standards • Europe: CE EMC,CB-Scheme:IEC60950-1, GS: EN60950-1: 2001 • North Americ

Rev. 1.14 - 3 - SRP-770II Manual Information ※ Manual Information & Usage Precautions This user manual contains basic information for product us

Rev. 1.14 - 4 - SRP-770II Safety Precautions In using the present appliance, please keep the following safety regulations in order to prevent any h

Rev. 1.14 - 5 - SRP-770II CAUTION Violating following instructions can cause slight wound or damage the appliance. Do not use the pr

Rev. 1.14 - 6 - SRP-770II Other Precautions The copyright for this user manual and various other manuals is property of the BIXOLON Co., Ltd. Any

Rev. 1.14 - 7 - SRP-770II1. Content Confirmation The following items should all be contained in the printer package. Contact the dealer from which

Rev. 1.14 - 8 - SRP-770II2. Product Part Names Feed ButtonCover Peel-offCover Lever Printer HeadPaper Holder Paper Guide Peel-off Sensor

Rev. 1.14 - 9 - SRP-770II SAMSUNGLABEL PRNTER Dip Switch Auto Cutter(Option)IEEE1284 Receptacle USB Recepta