Bixolon SRP-350plusIII User Manual download pdf (Page 23)

Rev. 1.03

- 23 -

SRP-350/352plusIII

2. Self-Test

The self-test checks whether the printer has any problems. If the printer does not function

properly, contact your dealer. The self-test procedure is as follows:

2-1 Make sure paper roll has been installed properly.

2-2 Turn on the power while holding down the FEED button and the self-test begins.

2-3 The self-test prints the current status of the printer including control ROM version and

the DIP switch settings.

2-4 After printing the current printer status, the printer wait for the next step after printing

the following lines. (The paper signal light keeps blinking.)

SELF-TEST PRINTING.

PLEASE PRESS THE FEED BUTTON.

2-5 Press the FEED button to continue printing. The printer prints a form using the built-in

character sets that can be printed.

2-6 The self-test ends automatically and the printer cuts the paper after printing the

following line.

*** COMPLETED ***

2-7 The printer is ready to receive data for normal operation upon completion of self-test

operation.

1 2 ... 18 19 20 21 22 23 24 25 26

No comments

Bixolon SRP-350plusIII User Manual Page 23