BIXOLON SRP-350 PlusC User Manual download pdf (Page 19)

Rev. 1.08

- 19 -

SRP-350/352plusA&C

2. Self test

The self-test checks whether the printer has any problems. If the printer does not function

properly, contact your dealer. The self-test checks the following;

2-1 Make sure paper roll has been installed properly.

2-2 Turn on the power while holding down the FEED button. The self-test begins.

2-3 The self-test prints the current printer status, which provides the control ROM version

and the DIP switch setting.

2-4 After printing the current printer status, self-test printing will print the following,

and pause (The PAPER LED light blinks).

SELF-TEST PRINTING.

PLEASE PRESS THE FEED BUTTON.

2-5 Press the FEED button to continue printing.

The printer prints a pattern using the built-in character set.

2-6 The self-test automatically ends and cuts the paper after printing the following.

*** COMPLETED ***

2-7 The printer is ready to receive data as soon as it completes the self-test.

1 2 ... 14 15 16 17 18 19 20 21 22

No comments

BIXOLON SRP-350 PlusC User Manual Page 19