BIXOLON SPP-R200II User Manual

User's Manual SPP-R200II Mobile Printer Rev. 1.01 http://www.bixolon.com

Rev. 1.01 - 10 - SPP-R200II 1. Content Confirmation The following items should all be contained in the printer package. Contact the dealer from w

Rev. 1.01 - 11 - SPP-R200II 2. Product Part Names • Front • Rear Cable ConnectionPower ConnectionBatteryHole for mounting belt strap / belt cli

Rev. 1.01 - 12 - SPP-R200II 3. Installation & Usage 3-1 Battery Installation 1) Insert the battery on the rear side of the printer, ali

Rev. 1.01 - 13 - SPP-R200II 3-2-2 Battery Cradle (Optional) Usage 1) Connect the power cord ② to the battery charger ①. 2) Connect the battery c

Rev. 1.01 - 14 - SPP-R200II 3-2-4 Using Single Cradle (Optional) 1) Turn the printer off. 2) Slide the printer in the Single Cradle as shown in th

Rev. 1.01 - 15 - SPP-R200II 3-2-5-2 Charging Battery (Printer) 1) Fasten batteries via the battery hooks into the Quad Charger as shown above. 2) P

Rev. 1.01 - 16 - SPP-R200II 3-3 Paper Installation 1) Press the Open button to open the paper cover. 2) Insert the paper as shown in the

Rev. 1.01 - 17 - SPP-R200II 3-4 Using Belt Strap 1) Insert the belt strap screw into the belt strap hole. 2) Use a coin to tighten the belt s

Rev. 1.01 - 18 - SPP-R200II 3-5 Using Belt Clip (Optional) 1) Insert the screw of the belt clip to the belt clip mounting hole. 2)

Rev. 1.01 - 19 - SPP-R200II 3-6 Using Case (Optional) 1) Open its top cover 2) Insert the printer in the case in the direction shown in

Rev. 1.01 - 2 - SPP-R200II Table of Contents ※ Manual Information & Usage Precautions ························································

Rev. 1.01 - 20 - SPP-R200II 3-7 Protective Case (Optional) Usage 1) Open its top cover. 2) Insert your printer into the protective case as

Rev. 1.01 - 21 - SPP-R200II 3-8 Using Vehicle Holder (Optional) 1) Assemble the vehicle holder to the mount. 2) Adjust the vehicle

Rev. 1.01 - 22 - SPP-R200II 3-9 Control Panel Usage • Power Button This button is used to turn the printer on and off. When the print

Rev. 1.01 - 23 - SPP-R200II 3-10 MSR Usage 1) Press the MSR cover to open. 2) Insert the card as shown in the image and swipe in the direction of

Rev. 1.01 - 24 - SPP-R200II • Self-Test Sample (For Bluetooth) Firmware version : V01.00 STOB 050412 Butter Capacity : 128K Bytes Print Density :

Rev. 1.01 - 25 - SPP-R200II • Self-Test Sample (For Wireless LAN) Firmware version : V01.00 STOB 050412 Butter Capacity : 128K Bytes Print Densit

Rev. 1.01 - 26 - SPP-R200II 5. Label Printing Function 5-1 Label Function Setting Label paper and black mark paper available at the label mode. • Se

Rev. 1.01 - 27 - SPP-R200II 6. Peripherals Connection This product can communicate with other devices via Bluetooth communication and cable. 6-1 Blu

Rev. 1.01 - 28 - SPP-R200II 7. Printer Cleaning If the interior of the printer is dusty, print quality can decline. In such a case, follow the instru

Rev. 1.01 - 29 - SPP-R200II 8. Appendix 8-1 Specifications Item Description Printing Printing Method Thermal printing Printing Speed 90 mm/sec (Recei

Rev. 1.01 - 3 - SPP-R200II Manual Information ※ Manual Information & Usage Precautions This user’s manual contains basic information for produc

Rev. 1.01 - 30 - SPP-R200II 8-2 Certification 1) WEEE (Waste Electrical and Electric Equipment) This mark shown on the product or its liter

Rev. 1.01 - 31 - SPP-R200II Disposal Directions • Do not dispose of waste battery packs recklessly. • Do not burn or throw in fire to dispose of the

Rev. 1.01 - 4 - SPP-R200II Safety Precautions In using the present appliance, please keep the following safety regulations in order to prevent any

Rev. 1.01 - 5 - SPP-R200II CAUTION Violating following instructions can cause slight wound or damage the appliance. Do not use the prin

Rev. 1.01 - 6 - SPP-R200II Battery Safety Precautions Make sure to review the user manual carefully prior to product use. Neglecting to heed the

Rev. 1.01 - 7 - SPP-R200II 10. Do not pierce the battery with a pointed object, such as nail or awl, or strike with a heavy object, such as a hammer,

Rev. 1.01 - 8 - SPP-R200II Caution 1. Do not use or leave the battery in a location exposed to high temperatures or intense direct sunlight, such

Rev. 1.01 - 9 - SPP-R200II Recommended 1. Review the user manual for instructions concerning insertion/removal of batteries into/from th